NES Conductive Level Switch

Brand: KOBOLD Instruments, Inc.

KOBOLD limit switches of model NES are used for level monitoring and pump control of conductive liquids. The design without any moving parts allows service with critical media with, for example, solid content, negligible density or high viscosity.

The instruments operate on the conductive principle. A low a.c. voltage is applied between the conductive wall of the tank or the earth electrode (longest electrode) and a switching point electrode.

If the conductive medium touches the electrodes, a negligible alternating current flows across the electrodes and the conductive medium to the electrode relay.

The relay amplifies the alternating current and operates an relay or a pump controller. An electrode relay of model NE-104 is required per switch point for signaling. For min./max. control two switching point electrodes must be connected to the relay. Relay NE-304 operates as two single relays (NE-104).

Specifications

Approvals & Certifications

  • CE

BSP Connection

  • G 1/2"
  • G 1-1/2"

Connection Material

  • 316Ti Stainless Steel
  • Polypropylene
  • PTFE

Enclosure / Body Material

  • 316 Stainless Steel
  • Polyamide (PA)

Enclosure Finish

  • Polyolefin - Electrode (Complete Coating)
  • PTFE - Electrode (Complete or Partial Coating)

Environmental Protection

  • IP65

Length

  • 118" (3,000 mm) - Maximum

Materials of Construction

  • 316Ti Stainless Steel - Electrodes
  • Hastelloy C - Electrodes
  • Titanium - Electrodes

Maximum System Pressure

  • psi: 217 (kPa: 1,500, bar: 15) for Polypropylene Connection
  • psi: 435 (kPa: 3,000, bar: 30) for Stainless Steel Connection
  • psi: 87 (kPa: 600, bar: 6) for PTFE Connection

Operating Temperature

  • Maximum

Screw Material

  • 316 Stainless Steel
  • Polypropylene
  • PTFE

Supply Voltage

  • 110 Vac

Show More