MP300i Series Programmable Temperature Transmitter

Brand: Intempco Controls, Inc

MP300i series is a high performance temperature transmitter which converts RTDs, Thermocouples and voltage signals into a 4-20 mA current along with a superimposed HART protocol digital communication. 

Complete configuration, calibration and parameters monitoring can be fully achieved through the two-wire current loop by means of a convenient PC software and USB interface called TxConfig-HART. 

Sensor type input is fully programmable for most relevant RTDs, thermocouples, variable resistors, and voltage in mV. 

High Isolation between input and output drastically improves stability and reliability with greater immunity to electromagnetic noises in extremely harsh industrial environments.
Features
  • Programmable input: Thermocouple or RTD
  • 2-wire loop-powered 4-20 mA output
  • 2, 3 or 4-wire RTD and thermocouples with linear output
  • Configuration on a PC with the TxConfig-HART interface
  • Cold junction compensation for thermocouples
  • Galvanic isolation: 1.5 kV

Specifications

Accuracy

  • Pt100 & Voltage: 0.2 %
  • Thermocouples: Better than 0.3 % of The, Max.

Communication

  • PC Software & USB Interface: TxConfig-HART

Current

  • Excitation (Pt100): 0.35 mA, Alpa = 0.00385 According to IEC 60751

Electrical Protection

  • Internal Protection Against Polarity Inversion in the Loop Voltage

Environmental Protection

  • IP40 - MP300i
  • IP54 - MP300Di

Humidity

  • 20 to 90 % Relative Humidity

Input Impedance

  • Thermocouples Impedance > > 1 Megaohm

Isolation

  • 1.5 kV

Operating Temperature

  • -40° to 85° C (-40° to 185° F)

Output

  • 2-Wire Loop Powered 20-4 mA, Linear to Temperature
  • 2-Wire Loop Powered 4-20 mA, Linear to Temperature

Power Supply

  • 12-35 Vdc, Across the Transmitter

Resistance

  • 0 to 2,000 ohms

Resolution

  • 12-bits (0.3 µA)

RTD Type

  • Cu50
  • Cu500
  • Ni100
  • Ni1000
  • Ni500
  • Pt100
  • Pt1000
  • Pt500

Sensor, Probe Connection

  • 2-Wire
  • 3-Wire
  • 4-Wire

Sensor, Probe Type

  • B Thermocouple
  • E Thermocouple
  • J Thermocouple
  • K Thermocouple
  • N Thermocouple
  • RTD
  • R Thermocouple
  • S Thermocouple
  • T Thermocouple

Span - Minimum

  • Resistance: 20 ohms
  • RTD Pt100, Ni500, Ni1000: 20° C (68° F)
  • RTD Pt500, Pt1000, Cu50, Cu500: 40° C (104° F)
  • Thermocouple Typical J, T, N, E & RTD Ni100: 50° C (122° F)
  • Thermocouple Typical K: 100° C (212° F)
  • Thermocouple Typical R, S, B: 500° C (932° F)
  • Voltage: 20 mV

Temperature Range

  • -270° to 1,820° C (-454° to 3,308° F)

Torque

  • 7.08”-Pounds (0.8 Nm)

Voltage

  • -100 to 2,000 mV

show more