LTX15 Continous Capacitance Level Transmitter

Brand: Intempco Controls, Inc.

The INTEMPCO series LTX15 dual-probe level sensors are primarily designed for continuous level measurement of corrosive liquids in metallic or non-metallic reservoirs.

The selection of corrosion-resistant materials used for the probe and process connection ensures that LTX15 can withstand extremely corrosive media.

This sensor is ideal for swimming pools, water treatment plants, petrochemical, pharmaceutical and many other commercial and industrial applications.

LTX15 is low cost and intended for OEM’s. The LTX15 level transmitter is well suited to measure the levels of very thick conductive liquids or slurries.

Because the probes are some distance from each other, they will not easily clog. The probe measures level by measuring the change in capacitance as level changes in the tank.

The microprocessor-based electronics converts this capacitance change into a linear, highly accurate 4-20 mA signal.
Features
  • For non-metallic and metallic tanks
  • Compact dual rod design
  • Accuracy 1% of span
  • 1-1/2" NPT thread standard fitting
  • Heavy duty industrial design
  • With Teflon fitting, all wetted surfaces Teflon

Specifications

Accuracy

  • ± 1 % of Full Span (Constant Dielectric)

Ambient Temperature Range

  • -40° to 70° C (-40° to 158° F)

Bushing Material

  • TFE

Calibration

  • Via 4 Push-Button Switches Non-interactive Settings

Capacitance

  • 10 to 10,000 PF

Conduit Connection

  • 1/2" NPT Female
  • PG9 Gland

Damping Adjustment

  • 0 to 30 seconds

Enclosure, Body Material

  • 316 Stainless Steel
  • PVC

Environmental Protection

  • IP66
  • NEMA 4X

Loop Resistance

  • 700 ohms at 24 Vdc, Maximum

Materials of Construction

  • Spacer: TFE

Mounting

  • Remote Mounted DIN Rail Module

NPT Connection

  • 1-1/2" NPT Male

Output

  • 4-20 mA, Loop Powered

Pressure Range

  • bar: 1 to 7
  • kPa: 100 to 700
  • psi: 14.5 to 100

Process Temperature

  • 200° C (392° F) - Maximum

Repeatability

  • ± 0.1 % of Span

Sensor, Probe Diameter

  • Probe O.D.: 1/2" (12.7 mm)

Sensor, Probe Length

  • Probe: 6 to 240" (152.4 to 6,096 mm)

Sensor, Probe Material

  • Probe: PFA Teflon

Supply Voltage

  • 12-36 Vdc

Wetted Materials

  • Fitting: 316 Stainless Steel
  • Fitting: CPVC
  • Fitting: PVC
  • Fitting: Teflon
  • Probe: Fully PFA Teflon Clad

  • Pharmaceutical Plants
  • Waste Treatment Plants
  • Water Storage Tanks
  • Chemical Holding Tanks
  • Food and Beverage Industry
  • Acids and Very Corrosive Liquids
  • Do Not Use With: Vegetable Oils, Fuel Oils, MEK and Other Solvants

Show More