LFT42 Float Level Transmitter

Brand: Intempco Controls, Inc

The LFT42 are synthetic (non-metallic wetted parts) float level transducers suitable for level measurement in vessels of up to 96" (2,438 mm) in height.

Floats are made from PTFE (Teflon). Tubes are 316SS clad with PFA or PTFE (Teflon). Flanges and fittings are available in Polyethylene (PE), polypropylene (PP), PVC and PTFE (Teflon).

The use of 2" NPT fitting or flange accommodates the diameter of the float and allows the units to be installed from the top of the vessel or mounting bracket, without removing the float.

Each transducer comes standard with a remote mounted DIN rail transmitter, float and a fitting/probe. Reliable operation and simple design makes the LFT42 an excellent choice for many corrosive level sensing applications.
Features
  • All Teflon® wetted parts available
  • Various process fittings available
  • Probe lengths to 96”
  • Standard resolution 1/2”, 1/4” resolution available
  • M12 Micro-male plug or extension cable available
  • Continuous analog level measurement
  • Analog 4-20 mA output via remotely mounted DIN Rail transmitter
  • Undisturbed by foaming
  • Vapor insensitive
  • Liquid interface detection

Specifications

Ambient Temperature Range

  • -20° to 60° C (-4° to 140° F)

Cable Length

  • Extension: 15 feet (5 metres) for M12 Micro-Male Connector
  • Extension: 6 feet (2 metres) for M12 Micro-Male Connector

Cable Material

  • PVC
  • Silicone
  • Teflon with Stainless Steel Armor

Current

  • Sensing: 2.5 mA - Max.

Electrical Connectors

  • M12 Micro-Male Connector

Environmental Protection

  • IP10
  • IP66
  • NEMA 4X
  • Transmitter Typical (DIN Rail): IP40
  • Transmitter Typical (DIN Rail): NEMA 1

Flange Material

  • PE (Polyethylene)
  • PP (Polypropylene)
  • PTFE (Teflon)
  • PVC

Flange Size - 2-1/2” (DN 65)

  • 2-1/2” (DN 65) - 150# ANSI

Flange Size - 2” (DN 50)

  • 2” (DN 50) - 150# ANSI

Flange Size - 3” (DN 80)

  • 3” (DN 80) - 150# ANSI

Flange Size - 4” (DN 100)

  • 4” (DN 100) - 150# ANSI

Materials of Construction

  • DIN Rail: Polyamide

Measuring Range

  • 12 to 96” (304 to 2,438 mm)

Mounting

  • DIN Rail

NPT Connection

  • 2” NPT Male

Operating Pressure

  • psi: 44 (kPa: 300, bar: 3) at 21° C (69.8° F) - Max.
  • psig: 40 (kPa: 270, bar: 2.7) at 21° C (69.8° F) - Max.

Operating Temperature

  • 0° to 80° C (-32° to 176° F) - Max.
  • -40° to 150° C (-40° to 302° F) - Max.

Output

  • 0-10 Vdc, 3-Wire
  • 0-5 Vdc, 3-Wire
  • 1-5 Vdc, 3-Wire
  • 4-20 mA, 2-Wire

Pressure Range

  • bar: 0 to 3
  • kPa: 0 to 300
  • psi: 0 to 44

Process Connection Material

  • Polyethylene
  • Polypropylene
  • PTFE (Teflon)
  • PVC

Process Temperature

  • -20° to 120° C (-4° to 250° F)

Sensor, Probe Length

  • Probe: 6 to 96” (152.4 to 2,438 mm)

Sensor, Probe Material

  • Probe Clading Material: PFA (Teflon)
  • Probe Clading Material: Polypropylene
  • Probe Clading Material: PTFE (Teflon)

Stem Material

  • PFA Encapsulated Alloy Steel
  • PP (Polypropylene)
  • PTFE (Teflon) Clad

Storage Temperature

  • -40° to 80° C (-40° to 176° F)

Supply Voltage

  • 12-32 Vdc

Voltage

  • Sensing: 5 Vdc, Max.

Wetted Materials

  • Fitting: PE (Polyethylene)
  • Fitting: PVC
  • Float, Fitting: PP (Polypropylene)
  • Float, Fitting: PTFE (Teflon)

  • Ideal for Level Measurement Where Installation Space is Limited or Tanks are Compact
  • Acid and Water Based Liquids
  • Very Corrosive Liquids
  • Chemical Holding Tanks with Clean Liquids
  • Measurement of Liquid Levels in Mobile Equipment
  • Machinery, Energy, Naval, Industrial, Automation
  • Not Recommended Where Liquids are Dirty or Sticky

show more