LTR52 Self-Adjusting "Smart" Radar Level Sensor

Brand: Intempco Controls, Inc.

The LTR52 Series radar level sensors are designed for applications requiring non-contact level measurement, in which ultrasonic level measurement is not acceptable.

The LTR52 Series radar technology can be adjusted for variables such as materials to be measured, vessel configuration, and system interface.

These sensors are ideal when vapor or dust prevents ultrasonic-wave measurements.

The LTR52 Series radar sensors can detect the level under a layer of light dust, but if the dust particle size increases, or if the dust gets thick, they will no longer detect the solid level.

Instead, the level of the dust will be measured. Internal piping, deposits on the antenna, multiple reflections, or reflections from the wall can interfere with the proper operation of the radar sensor.

Other sources of interference are rat-holing and bridging of solids, as well as angled process material surfaces that can reflect the radar beam away from the receiver.
Features
  • Self adjusting tracking radar for solid materials
  • Programmable (recommended) and simple push-button calibration
  • Output 4-20 mA/20-4 mA (Isolated on 4-wire model’s only)
  • Optional RS232 or RS485 for communications with calibration, diagnostics and data logging software
  • Optional HART on 2-wire models
  • PLC compatible (Modbus RTU)
  • 2-wire DC loop-powered, 3-wire DC, or 4-wire isolated AC operation

Specifications

Accuracy

  • ± 0.1 % of, Maximum
  • ± 0.25 % of, Maximum
  • Loop Powered Display: ± 0.5 % of Reading

Approvals & Certifications

  • FCC Part 15 - Low Power Communication Device

Calibration

  • Manual or Via Communications Port

Class

  • Installation Category: Class II

Communication

  • HART (2-Wire Only)
  • Modbus RTU
  • RS-232
  • RS-485

Conduit Connection

  • Conduit Entry: 1/2" NPT × 2

Cover Material

  • Threaded Wiring Access Cover: Aluminum
  • Threaded Wiring Access Cover: Stainless Steel

Display

  • Head Mounted LCD Display
  • Loop Powered Display: 4 -1/2-Digit LCD 1/2" High

Enclosure, Body Material

  • Aluminum - 94V0
  • Stainless Steel - 94V0

Environmental Protection

  • IP67
  • NEMA 6

Frequency

  • 26 GHz

Humidity

  • 0 to 95 % Non-Condensing

Length

  • Antenna Extension: 6" (152.4 mm) Only with Teflon Rod Antenna
  • Antenna Extension: 8" (203.2 mm) Only with Teflon Rod Antenna

Load Resistance

  • Power Supply: 750 ohms, Maximum

Materials of Construction

  • Antenna: PTFE
  • Horn Antenna: 316L Stainless Steel

Measuring Range

  • 50 to 240 feet (15 to 73 metres)

NPT Connection

  • 2" NPT Male
  • 3" NPT Male

Output

  • 20-4 mA
  • 2-Wire with 16-30 Vdc Loop Powered
  • 3-Wire with 12-30 Vdc Power
  • 4-20 mA

Power

  • Transmit: 50 µW Average

Power Supply

  • 115 Vac (± 20 %), 1.7 VA
  • 12-30 Vdc, 0.07 A, Maximum
  • 16-30 Vdc (Loop Powered) 0.07 A, Maximum
  • 230 Vac (± 20 %), 1.7 VA

Pressure Range

  • bar: 0 to 5
  • kPa: 0 to 500
  • psi: 0 to 72.52

Process Temperature

  • -40° to 60° C (-40° to 140° F)
  • C/W Teflon De-Coupler: -40° to 177° C (-40° to 350° F)

Range

  • Loop Powered Display: 3.5-22 mA

Resolution

  • 0.22 to 1.06" (5.7 to 26 mm)
  • Output: 6.1 µA

Temperature Range

  • -40° to 60° C (-40° to 140° F)

Voltage Drop

  • Loop Powered Display: 0.95 V at 20 mA

  • Bulk Solids
  • Powders
  • Solids with Dust

Show More