DMS Digital Mass Flowmeter and Regulator

Brand: KOBOLD Instruments, Inc.

The new DMS-Series KOBOLD digital mass flow meters and mass flow regulators have been specially developed for use in gas measurement, where excellent accuracy, high reliability, robust casing, stainless materials and maximum flexibility are important.

The six keys on the control panel and the graphic display make the meter easy to use. The display unit, full scale value of the measuring range, the valve function and the desired value can be set in the simple menu structure.

The second analogue output can be selected as 0 - 5 V DC , 0 -10 V DC or 1 - 5 V DC. If the medium changes, the corresponding gas can simply be selected. The memory stores the parameters of ten gases, and they can also be programmed off standard.

A password protects the configuration against unauthorized access. The electrical connection is made with a Sub-D plug. Optionally, the control panel can be connected with a RJ45 plug and socket connection.

A special RCA connector is required for the RS232 interface. Compared with float flow meters, the DMS mass flow meter has neither moving parts, nor is it necessary to compensate for changes in operating conditions such as pressure and temperature, because here the mass flow is being measured.

The measuring instrument can be installed in practically any position and the simple mechanical construction provides the highest degree of reliability, both with the use of aggressive gases, and also in raw industrial operation.

Specifications

Accuracy

  • ± 1 % of Full Scale

Adjustment

  • Via 6 Keys Gas Typical, Output 2, End Value, Units, Desired Value, Valve Function & Password

Ambient Temperature Range

  • 0° to 50° C (32° to 122° F)

Applications

  • Analysis Devices
  • Boiler Controls
  • Engineering
  • Exhaust Measurement
  • Gas Monitoring
  • Laminator Systems
  • N₂/O₂ - Generators
  • Paint Lines
  • Semiconductor Industry

Display

  • Graphic LCD Display, 47 × 26 mm

Electrical Connectors

  • 15-Pole D-Sub Plug Including Mating Plug with 3 metre Cable
  • RJ45 for Remote Control Unit with Display

Enclosure, Body Material

  • 316 Stainless Steel

Environmental Protection

  • IP21

Flow Rate

  • 0 to 185 Nl/min for Air
  • 0 to 7 Nml/min

Maximum System Pressure

  • psi: 500 (kPa: 3,447, bar: 35)

Mounting Position

  • Any, Flow-Through in the Direction of the Arrow

NPT Connection

  • 1/2" NPT Female
  • 1/4" NPT Female

Output

  • Analog Output 1: 4-20 mA - Maximum
  • Analog Output 2: 0 to 5 Vdc, 0-10 Vdc, 1 to 5 Vdc, (Load Minimum 1,000 ohms)
  • Digital Output - RS-232
  • Only Regulator - 4-20 mA, 0 to 5 Vdc, 0-10 Vdc, 1 to 5 Vdc

Power Requirement

  • 15-24 Vdc ± 10 %, 230 mA (DMS-1/2)
  • 24 Vdc ± 10 %, 500 mA (DMS-5) & 24 Vdc ± 10 %, 800 mA (DMS-6)

Process Temperature

  • 0° to 50° C (32° to 122° F)

Repeatability

  • ± 0.2 % of Full Scale

Response Time

  • 2 seconds - Typical
  • 300 milliseconds

Reverse Polarity Protection

  • Ripple - 100 mV, Maximum

Seat / Seal Material

  • FPM
  • NBR

Sensor / Probe Material

  • Stainless Steel

Supply Pressure Effect

  • ± 0.15 % of Full Scale/bar

Temperature Effect

  • ± 0.05 % of Full Scale/°C

Temperature Range

  • Maximum

Show More