LTX10 Sanitary Capacitance Level Transmitter

Brand: Intempco Controls, Inc

The INTEMPCO LTX10 Sanitary series are highly reliable and microprocessor based RF level sensors designed to measure tank levels of conductive and non-conductive liquids in metal tanks.

LTX10 sensors measure the change in capacitance that occurs as the tank level changes and outputs a standard loop-powered 4-20 mA signal.

After calibration any change in level is recognized and converted to an Analog 4-20 mA signal.

LTX10 sensors use very high frequency and very low amplitude sensing circuitry to greatly minimize the effects of coating on the sensing probe.

The LTX10 includes a standard 4-20 mA loop-powered LTX transmitter housed in a rugged enclosure, a 1/2" (12.7 mm) diameter rigid probe for ranges up to 20 feet (6.09 meters) and a polished stainless Tri-Clamp.

Probe material is SS316, supplied bare or PFA jacketed. The LTX10 is designed for tanks which have available Tri-Clamp connection.
Features
  • High quality sanitary design
  • Continuous loop-powered 4-20 mA operation
  • Microprocessor based
  • Accuracy 1% of span for constant dielectric of material
  • Non-interactive zero and span calibration
  • Calibration accomplished with 4 push buttons
  • Stainless and PVC housings available
  • Tri-Clamp sanitary fitting standard, others available
  • PFA Teflon coated or bare SS316 probes available

Specifications

Accuracy

  • ± 1 % of Full Span (Constant Dielectric)

Ambient Temperature Range

  • -40° to 70° C (-40° to 158° F)

Cable Length

  • 0 to 1,000 feet (0 to 300 metres)

Calibration

  • Via 4 Push-Button Switches

Capacitance

  • 10 to 10,000 PF

Conduit Connection

  • 1/2” NPT Female
  • 3/4” NPT Female
  • PG9 Gland

Damping Adjustment

  • 0 to 30 seconds

Enclosure, Body Material

  • Cast 316 Stainless Steel
  • Machined 316 Stainless Steel
  • PVC

Environmental Protection

  • IP66
  • NEMA 4X

Loop Resistance

  • 700 ohms at 24 Vdc, Max.

Materials of Construction

  • Mounting Fitting: 316 Stainless Steel

Output

  • 4-20 mA, 2-Wire Loop Powered

Pressure Range

  • bar: 1 to 34
  • kPa: 100 to 3,400
  • psi: 14.5 to 500

Process Temperature

  • 200° C (392° F)

Repeatability

  • ± 0.1 % of Span

Sensor, Probe Diameter

  • Probe: 1/2” (12.7 mm)

Sensor, Probe Length

  • Probe: 6 to 240” (152.4 to 6,096 mm)

Sensor, Probe Material

  • Probe: Bare 316 Stainless Steel
  • Probe: PFA Teflon Jacketed

Supply Voltage

  • 12-36 Vdc

Tri-Clamp Connection

  • 1-1/2” Tri-Clamp
  • 2” Tri-Clamp
  • 2-1/2” Tri-Clamp
  • 3” Tri-Clamp

  • Pharmaceutical Plants, Food Processing Plants
  • PFA Jacketed Probes Required for Conductive Media, Such as Water and Water-Based Liquids
  • PFA Jacketed Probes for Organic Acids
  • PFA Maximum Temperature 200°C
  • Use Bare Probes With Non-Conductive Media Such as Oils and Fuels in Some Metallic Tanks
  • On-Site Calibration Required
  • Not Recommended Where Material Dielectric Changes
  • Tanks Must be Conductive or Special Grounding May be Required

show more