Images are representations only.
HSA Humidity Sensor/Controller
Brand: Intempco Controls, IncThe Intempco HSA is a humidity sensor/controller with several output features.
It may be used as a modulating controller for proportional humidifiers, or as an on/off controller for humidification or dehumidification systems (using the N/C contact).
The setpoint may be offset (downward) due to outdoor temperatures below freezing with the addition of the optional OTS-1 temperature sensor.
An advanced non-linear offset rate is used to allow high offset ratios without the danger of having the setpoint drop too low on very cold days.
An actual setpoint output is available for precise adjustment and monitoring of the reset function, and a humidity output is available for monitoring the actual humidity at the humidistat.
The HSA is rugged and can withstand most ventilation type conditions including swimming pool environments.
Features- Wall mount and duct mount version available
- Outdoor temperature offset for setpoint reset due to low outdoor temperature
- N/C and N/O contact output for on/off control
- Modulation output (0-10V) for proportional control
- Setpoint adjustment inside case. No humidistat guard required
- Actual humidity output available (0-10V)
- Low cost
- Can be mounted directly on drywall or with an electrical box
- HSA-DM comes with backing gasket and mounting screws for installation directly on ducts
Specifications
Brand
Accuracy
- Sensor: ± 3 % at 40 % Relative Humidity, 23° C (73.4° F)
Consumption
- Power: 2 VA, Max.
Electrical Contacts
- Normally Closed
- Normally Open
Humidity
- Output: 0 to 100 % Relative Humidity
Input
- Power: 24 Vac ± 15 %
- Power: 27 Vdc (20 to 0 %)
Mounting
- Duct Mount
- Wall Mounting
Operating Temperature
- 10° to 40° C (50° to 104° F), 0 to 95 % Relative Humidity
Output
- 0-10 Vdc
- 0-5 Vdc
- Contact Output: 3 A at 120 Vac
Output Impedence
- 10 kiloohms
Set Point Range
- 0 to 100 %
Storage Temperature
- -10° to 50° C (14° to 122° F), 0 to 95 % Relative Humidity