DTG61 LCD Digital Temperature Gauge

Brand: Intempco Controls, Inc

Intempco DTG Series battery powered LCD Digital Temperature Gauges, is a step above all competition, providing accurate and reliable electronic temperature indication.

Because of the robust IP67 housing all stainless design, they offer protection against moisture and dust penetration.

The DTG can be used as a direct replacement for Bi-Metal, Liquid Bulb and Glass Thermometers where no power is available.

All models are factory calibrated for maximum accuracy. The DTG's 4-digit 1/2" (12.7 mm) LCD display can be factory set in units of °C or °F.

With resolution to a tenth of a degree, the DTG takes the guesswork out of reading dials and mercury columns.

Powered by two high performance 3.6V "AA" batteries, this thermometer will provide a minimum of five years continuous operation before batteries require replacement.
Features
  • Large 4-digit LCD display
  • Battery powered, 2 AA 3.6 Vdc, life 5 years minimum
  • High accuracy Microprocessor Based
  • Utilizes Pt-1000 Ohm RTD Class A element for temperature sensing
  • Optional RTD output, 2, 3 or 4-wire
  • Resolution 1/10 of a degree
  • IP67/NEMA 4X (Waterproof )
  • All stainless steel 316 construction
  • Display in degree C or F
  • Programming and calibration option available
  • Meets CFIA design requirements for Digital Thermometers
  • Self diagnostic circuitry with error indication

Specifications

Accuracy

  • ± (0.2 + 0.001 x |T|) °C, ± (0.36 + 0.001 x |T-32|) °F Option
  • ± (0.2 + 0.002 x |T|) °C, ± (0.36 + 0.002 x |T-32|) °F Factory

Ambient Temperature Range

  • 0° to 50° C (32° to 122° F)

Approvals & Certifications

  • 3A Sanitary

Battery Life

  • 5-Years Min.

Cable Length

  • 15 feet (5 metres)
  • 6 feet (2 metres)

Cable Material

  • PVC Insulation 90° C (195° F) - Max.
  • Silicone Insulation 200° C (392° F) - Max.
  • Teflon Insulation 200° C (392° F), with Stainless Steel Armour / Overbraid, 200° C (392° F) - Max.

Diameter

  • Sheath Outer Diameter: 1/4 to 5/8” (6.4 to 15.9 mm)
  • Tip Outer Diameter: 1/8 to 1/4” (3.2 to 6.4 mm)

Display

  • 4-Digit LCD Display 1/2” (12.7 mm)

Electrical Connectors

  • M12 Micro-Male Connector

Enclosure, Body Material

  • 316 Stainless Steel

Environmental Protection

  • IP67
  • NEMA 4X

Materials of Construction

  • Ferrule Material: 316 Stainless Steel
  • Ferrule Material: Teflon
  • Fitting & Ferrule Material: Brass

Mounting

  • Back Mounting
  • Bottom Mounting
  • Side Mounting (Right, Left, Display Front & Back)
  • Top Mounting

NACE & NIST

  • NIST

NPT Connection

  • 1/2” NPT Male
  • 1/4” NPT Male
  • 1/8” NPT Male
  • 3/4” NPT Male
  • 3/8” NPT Male

Operating Pressure

  • Probe - psig: 500 (kPa: 3,447, bar: 34.47) - Max.

Power

  • 3.6 V Lithium Battery

Resolution

  • Display: 0.01 at Viewable Range -99.99 to 99.99
  • Display: 0.1 at Viewable Range -58 to 392
  • Display: 1 at Viewable Range -328 to 1,112

Response Time

  • Refresh Rate: 3 seconds

RFI/EMI Effect

  • RFI: 1 % or Less Typical

RTD Type

  • Pt100
  • Pt1000

Sensor, Probe Diameter

  • 1/4” to 1/2” (6.3 to 12.7 mm)

Sensor, Probe Material

  • 316 Stainless Steel

Sensor, Probe Type

  • RTD 3-Wire, Class A DIN IEC 60715

Storage Temperature

  • -20° to 70° C (-4° to 158° F)

Temperature Effect

  • < 0.01 % of Full Scale/°C

Temperature Range

  • Sensor: -200° to 600° C (-328° to 1,112° F)

  • Replacement for Bi-Metal, Liquid Bulb and Glass Thermometers
  • Pharmaceutical
  • Food Preparation
  • Utilities and Municipal
  • Refineries
  • Chemical and Petrochemical Plants
  • Paper Mills
  • Hydraulics

show more