MIST PTS02 Threaded Thermowell Programmabl Temperature Switch & Transmitter

Brand: Intempco Controls, Inc

Series PTS02 is a Programmable Temperature Switch & Transmitter offering an Analog 4-20 mA output, transistor or relay switch output, and an optional RTD output.

Utilizing Intempco’s patented MIST technology, PTS02 is designed for optimum accuracy and performance.

The main areas of applications for this transducer are oil and gas as well as other hazardous areas.

PTS02 is shipped factory calibrated to customer specified temperature ranges. But the unique feature of the PTS02 is that it is re-programmable.

PTS02 is much more accurate than an RTD and a separate indicator / transmitter or switch.

When the PTS02 is re-scaled to a different temperature range, the calibrated default values are not lost.

This transducer can be re-calibrated by performing one-point or two-point calibration using known temperature standards.

This is where the PTS02 leaves the competition behind. Indicating temperature range, current output, switch set point, switching hysterises, switch logic, damping and other features are all programmable.
Features
  • CSA Class I Division 1 Explosion Proof
  • Available 4-20 mA or voltage programmable signal output
  • Available fully programmable switch output; relay or transistor
  • Field re-programmable with optional PC interface module & software
  • Security password and tracking protection for re-programming and re-calibration
  • Utilizes self-calibration feature for accurate and stable performance
  • Utilizes Pt-100 Ohm RTD Class A element for temperature sensing
  • Excellent long term properties
  • Standard SS316/SS316L construction
  • Type 4X, IP66/IP67 rated environmental protection
  • Easy installation with various mounting configurations

Specifications

Accuracy

  • ± (0.10° C (0.18° F) + 0.10 % of Calibrated Span) with Two-Point Calibration
  • ± (0.25° C (0.45° F) + 0.40 % of Span) with One-Point Calibration

Ambient Temperature Range

  • -40° to 80° C (-40° to 176° F)

Approvals & Certifications

  • CSA (C,US): Class I, Div. 1, Explosion-proof, Class I Groups A, B, C, D, Class II Groups E, F, G Class III, Typical 4X

Approvals & Certifications

  • Certificate of Compliance

BSP Connection

  • 1/2” BSPP Male
  • 1/2” BSPT Male
  • 3/4” BSPP Male
  • 3/4” BSPT Male
  • G 1/2” Male
  • G 3/4” Male

Cable Length

  • 1,200” (30.48 metres) - Max.

Cable Material

  • Silicone
  • Teflon

Consumption

  • 15 mA at 24 Vdc + Output Current 950 mW, Max.
  • 20 mA at 24 Vdc + Sourcing Current for PNP Output & NPN Output 500 mW, Max.
  • 50 mA at 24 Vdc for Relay Output 1200 mW, Max.

Current

  • Sensor: < 0.25 mA

Electrical Connectors

  • Multi-Conductor Cable or Single Conductors, Potted & Sealed, Min. Conductor: 22 AWG

Electrical Contacts

  • Normally Closed or Normally Open

Enclosure, Body Material

  • 316 Stainless Steel
  • 316L Stainless Steel

Environmental Protection

  • IP66
  • IP67
  • NEMA 4X

Hysteresis

  • Customer Programmable, 1 % of Range by Factory Setting

Input Impedance

  • 2-Wire & 3-Wire Voltage Output: 1,000 ohms (of Measuring Device, for Voltage Output)

Instrument Connection

  • 1/2” NPS Male
  • 1/2” NPT Male
  • 3/4” NPS Male
  • 3/4” NPT Male
  • G 1/2” Male (BSPP)
  • G 3/4” Male (BSPP)
  • M20 x 1.5
  • M27 x 2
  • R: 1/2” Male (BSPT)
  • R: 3/4” Male (BSPT)

Isolation

  • Input/Output (Between Probe & Output Signal): 500 Vdc

Materials of Construction

  • Armor or Overbraid over Teflon Cable: Stainless Steel

Maximum System Pressure

  • Probe/Tube Typical - psi: 0 to 3,000 (kPa: 0 to 20,680, bar: 0 to 206.8)
  • Thermowell - psi: 6,000 (kPa: 41,370, bar: 413.7)

Metric Connection

  • M20 x 1.5 Male
  • M27 x 2 Male

NPS Connection

  • 1/2” NPS Male
  • 3/4” NPS Male

NPT Connection

  • 1/2” NPT Male
  • 3/4” NPT Male

Output

  • 0-20 mA, Source 3-Wire
  • 3-Wire Outputs & Switching: 4-20 mA Linear to Temperature
  • 3-Wire, Linear to Temperature: 0-10 Vdc
  • 3-Wire, Linear to Temperature: 0-5 Vdc
  • 3-Wire, Linear to Temperature: 1-5 Vdc
  • Switching Output (Transistor NPN / Sink Current & PNP / Source Current): Max.

Power Supply

  • 12-32 Vdc Polarity Protected

Power Supply Effect

  • 2-Wire & 3-Wire Voltage Output: 0.001 %/V
  • 3-Wire Outputs & Switching: 0.005 %/V

Response Time

  • 0.5 to 30 seconds (Software Selectable)

RFI/EMI Effect

  • RFI: 1 % or Less Typical

RTD Type

  • RTD, Typical Pt100 DIN EN 6075, Class A

Sensor Circuit

  • 2.5 mA Downscale for 4-20 mA Output
  • 22 mA Upscale
  • 24 mA Upscale for 4-20 mA Output, 3-Wire

Sensor, Probe Connection

  • 2-Wire
  • 3-Wire

Sensor, Probe Material

  • 316 Stainless Steel
  • 316L Stainless Steel
  • Hastelloy C-276
  • Inconel 600
  • Monel 400

Sensor, Probe Type

  • RTD

Stability

  • Long Term Drift: ≤ 0.1 % of Full Scale Per Year - 2-Wire & 3-Wire Voltage Output

Storage Temperature

  • -50° to 85° C (-58° to 185° F)

Switch Type

  • NPN/PNP Transistor
  • SPDT

Temperature Effect

  • ± 0.001 % of Span/°C Deviation from 25° C (77° F)

Temperature Range

  • Switching Range: -50° to 200° C (-58° to 392° F)

Update Time

  • Warm-Up: 30 seconds

  • Oil and Gas
  • Refineries
  • Chemical and Petrochemical Plants
  • Paper Mills
  • Hydraulics
  • Mining

show more