Images are representations only.
LTX20UL RF Capacitance Level Transmitter
Brand: Intempco Controls, Inc
Intempco LTX20 Series two-wire RF level transmitter provides highly reliable, low cost level indication and control that is suitable for all liquid level applications that do not leave a severe build-up on the sensing element.
LTX20 transmitter measures the change in capacitance that occurs as the tank level changes, and outputs a standard loop-powered 4-20 mA signal.
It uses a very high frequency, very low amplitude sensing circuitry to greatly minimize the effects of coating on the sensing probe.
LTX20 is available as an integrally mounted package. A number of level sensing probes can be selected based on the application including bare stainless steel probe, rigid Teflon coated probe and rigid concentric.
Available housings are aluminum and stainless steel NEMA 4X.
Features- Explosion proof design
- Easy calibration
- Consistent accuracy
- Reliability
- Housings
- Mountings and probes
Specifications
Brand
Accuracy
- ± 0.5 % of Full Span
Ambient Temperature Range
- -40° to 70° C (-40° to 158° F)
Approvals & Certifications
- CSA (C,US) - Class I, Div. 2, Groups A, B, C, D, Hazardous Locations
- UL (C,US) - Class I, Div. 2, Groups A, B, C, D, Harzardous Locations
Calibration
- Via 4 Push-Button Switches, Non-interactive Zero & Span
Capacitance
- 10 to 10,000 PF
Conduit Connection
- 1/2” NPT
- 3/4” NPT
Damping Adjustment
- 0 to 30 seconds
Display
- Integral 4-Digit LCD
Enclosure, Body Material
- Aluminum
- Stainless Steel
Environmental Protection
- IP66
- NEMA 4X
Flange Size - 1-1/2” (DN 40)
- 1-1/2” (DN 40) - 150# (ANSI B16.9)
- 1-1/2” (DN 40) - 300# (ANSI B16.9)
Flange Size - 1” (DN 25)
- 1” (DN 25) - 150# (ANSI B16.9)
- 1” (DN 25) - 300# (ANSI B16.9)
- 1” (DN 25) - PN 16
- 1” (DN 25) - PN 40
Flange Size - 2-1/2” (DN 65)
- 2-1/2” (DN 65) - 150# (ANSI B16.9)
- 2-1/2” (DN 65) - 300# (ANSI B16.9)
Flange Size - 2” (DN 50)
- 2” (DN 50) - 150# (ANSI B16.9)
- 2” (DN 50) - 300# (ANSI B16.9)
- 2” (DN 50) - PN 16
- 2” (DN 50) - PN 40
Flange Size - 3” (DN 80)
- 3” (DN 80) - 150# (ANSI B16.9)
- 3” (DN 80) - 300# (ANSI B16.9)
- 3” (DN 80) - PN 16
- 3” (DN 80) - PN 40
Flange Size - 4” (DN 100)
- 4” (DN 100) - 150# (ANSI B16.9)
- 4” (DN 100) - 300# (ANSI B16.9)
- 4” (DN 100) - PN 16
- 4” (DN 100) - PN 40
Flange Size - 6” (DN 150)
- 6” (DN 150) - 150# (ANSI B16.9)
- 6” (DN 150) - 300# (ANSI B16.9)
- 6” (DN 150) - PN 16
- 6” (DN 150) - PN 40
Flange Type
- Raised Face (RF)
Humidity
- 10 to 55 % Relative Humidity
Loop Resistance
- 700 ohms at 24 Vdc, Max.
NPT Connection
- 1” NPT Male
- 1/2” NPT Male
- 3/4” NPT Male
Output
- 4-20 mA, Loop Powered
Power Supply Effect
- < 0.1 % of Output at, Max.
Pressure Range
- bar: 1 to 34
- kPa: 100 to 3,400
- psi: 14.5 to 500
Process Connection Material
- 316L Stainless Steel
- Carbon Steel
- Hastelloy C-276
- PFA (Non-hazardous)
- PTFE (Non-hazardous)
Response Time
- 2 to 30 seconds with Adjustable Damping Time
- Less than 2 to 3 seconds with No Damping Time
Sensor, Probe Diameter
- Probe O.D.: 0.75” (19 mm) for Concentric Shield
- Probe O.D.: 1/2” (12.7 mm) for General-purpose
Sensor, Probe Material
- Probe: 316L Stainless Steel Rod
- Probe: Hastelloy C-276 Rod
- Probe: PFA Fully Insulated Rod
- Probe: PTFE Fully Insulated Rod
Supply Voltage
- 12-30 Vdc